German Peat Layout

James H has supplied the following details on his new German Peat Layout in O14.

The layout is based on a number of German peat railways that are still in operation across Germany and draws on features from several of them. Much of the research for the layout has been on the excellent http://www.ingr.co.uk/ which is great resource for industrial narrow gauge railways across Europe. I have also purchased an excellent DVD on the subject of the German peat railways.

The layout will be 9 feet by 2 feet and is intended for home use, the base boards will be supplied By Tim Horn, http://www.timhorn.co.uk/baseboards/ these are laser cut baseboard from MDF. Woodwork is my least favourite part of the hobby and I am happy to let someone supply me with premade base boards!

Trackwork will be a mix of KB scale for visible track and copper clad for hidden sidings using Peco code flat bottom rail

I intend to depict 2 scenes on the layout, firstly the unloading scene, this involves the full peat wagons being unloaded into a tipper truck by a tippler and conveyor. The intention is to make a working tippler and conveyor. For the conveyor I have I am in the process of converting a 1/32 toy conveyor by company called Siku. The tippler will need to be scratch built, I intend to use an R/C servo to control it, this will allow the simulation of the tippler being rocked at the top of its movement to dislodge the load.

The second scene will be the ramshackle engine sheds, where basic work on the locos and wagons are stored, along with some maintenance trains.

Work so far has been on the stock for the layout, this has included a Diema DL6 from KB Scale, an O&K from Nonnemintre models and a scratch built Schoma loco of a more modern design built on a Bullant power bogie from Hollywood Foundry.

image1

Rolling stock is mainly peat wagons I have scratch built a couple using KB Scale frames and some large ones using on the KB Scale axle boxes.

The scratch built wagon, the body is from hard word strip and the chassis from styrene sections, the body side is hinged to work with the tippler:

image2

However as I want somewhere in the region of 20-30 of these so I have commissioned a body to be laser cut and 3D printed chassis:

It still needs some work, the frames need to be thinner and the details parts need adding. Again the body is hinged.

image3 image4